Oene van der Meer | D&D | Clarisea

D&D CLARISEA

Directly to: SK-3000 | SK-5000

The ClariSea fleece filter is a high efficiency water filtration system which effectively removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column. Suitable for use in marine aquariums, freshwater aquariums, fish-breeding systems and propagation systems for corals.

The ClariSea filter will completely replace the need for high maintenance filter socks and result in brilliantly clear water in your aquarium. The fleece filter will ensure the highest possible filtration efficiency for optimal light penetration and growth of your corals and plants. It will continuously removes detritus & organic waste from the water column preventing breakdown to nitrate & phosphate in your aquarium.

The ClariSea fleece filter dramatically reduces the load on your protein skimmer by removing even the smallest of particles. Constant filtration results in reduced maintenance of pumps, wave makers and protein skimmers, plus... no more socks to clean. It will noticeably reduce the accumulation of detritus in your aquarium substrate and sump.

 

SK-3000

​Features

  • High volume filtration capacity

  • Minimal installation footprint

  • Completely replaces the need for filter socks 

  • Self-assembly for easy cleaning

  • Multiple installation options 

  • Automatic advance of dirty fleece 

  • Multi-function smart controller

  • End of roll audible alarm

  • Filter jam/float error/water depth alarm

  • Phosphate free fleece material

  • Special low-odour fleece material

  • Integrated fail-safe overflow 

  • Silencer plates for quiet operation

  • Water bypass system

Specifications

  • Recommended flow rate: 3,000 l/h (800 US gph)

  • Particle size removal: down to 20 microns 

  • Maximum submerged water depth: 20cm (8”)

  • Hang-on bracket height adjustment: up to 12cm (4”) 

  • Maximum sump glass thickness for hang on bracket: 13mm (1/2")

  • Recommended aquarium size at 5 x tank turn over (3000l/hr) = 600lt

  • Recommended aquarium size at 4 x tank turn over (3000l/hr) = 750lt

  • Inlet connection: 32mm 

  • Filter fleece: 10cm (4”) width – length 25m (82ft)

Mounting & installation options

The Gen2 ClariSea is very flexible and easy to position within your sump: 

  • You can hang it on the back, front or sides of the most sumps.

  • You can freestand it on the base of a shallow sump with a water level below 200mm.

  • you can freestand it on a box or shelf in deeper sumps.

  • You can feed it from the front or from the back.

  • You can feed water from the top, side or at an angle.

  • You can even pump feed it.

See the dimensional drawing under downloads at the bottom of this page.

 

SK-5000

​Features

  • High volume filtration capacity

  • Minimal installation footprint

  • Completely replaces the need for filter socks 

  • Self-assembly for easy cleaning

  • Multiple installation options 

  • Manual advance of fleece (upgradeable to automatic advance)

  • Phosphate free fleece material

  • Special low-odour fleece material

  • Integrated fail-safe overflow 

  • Silencer plates for quiet operation

  • Water bypass system

Specifications

  • flow rate: up to 5,000 l/h (1320 US gph)

  • Particle size removal: down to 20 microns 

  • Maximum submerged water depth: 20cm (8”)

  • Hang-on bracket height adjustment: up to 12cm (4”) 

  • Maximum sump glass thickness for hang on bracket: 13mm (1/2")

  • Recommended aquarium size at 5 x tank turn over (5000l/hr) = 1000lt

  • Recommended aquarium size at 4 x tank turn over (5000l/hr) = 1250lt

  • Inlet connection: 32mm 

  • Filter fleece: 15cm (6”) width – length 25m (82ft)

Mounting & installation options

The Gen2 ClariSea is very flexible and easy to position within your sump: 

  • You can hang it on the back, front or sides of the most sumps.

  • You can freestand it on the base of a shallow sump with a water level below 200mm.

  • you can freestand it on a box or shelf in deeper sumps.

  • You can feed it from the front or from the back.

  • You can feed water from the top, side or at an angle.

  • You can even pump feed it.

See the dimensional drawing under downloads at the bottom of this page.

Copyright © 2017-2019 by Oene van der Meer

All rights reserved.

  • Facebook Social Icon

Oene van der Meer

Hamweg 88

9617AT Harkstede

Netherlands

Tel.: +31 (0)6 11 34 31 79

E-mail: sales@oenevandermeer.com