D&D Temperature controller

The Dual Digital Temperature Controller is designed to allow precise control of the temperature in an aquarium and has 2 modes which allow control of both heating and cooling at the same time.

  • Double mains power socket – one power socket for heater control and the other for fan/chiller control.

  • Display with temperature sensor – used to set and display temperature and alarms and measure temperature.

  • The plastic coated temperature sensor is waterproof and suitable for use in a marine aquarium.

 

Features

  • Plug and play - no wiring required.

  • Heating/cooling can be set to within 0.3 deg C of target temperature e.g. Control Range of 24.7 - 25.3 deg C (with set temp of 25 deg C).

  • Audible and Visual Alarm Function e.g alarm sounds if temp below 24 deg C or above 26 deg C (with alarm set to 1 deg C).

  • 2m long plastic coated temperature sensor with mounting suction cup.

  • Heating Control (resistive load, such as heater) max 1600W.

  • Cooling Control (inductive load, such as a chiller) max 600W.

  • Display: Back lit blue LCD – permanently lit.

  • Power off memory function

  • Makes an ideal control platform for our Schego Titanium aquarium heater

Size

  • Display panel size: 95mm x 50mm x 15mm

  • Control socket size: 160mm x 70mm x 45mm  


Technical Parameters

  • Temperature control range: 16 - 40 deg C  

  • Temperature differential setting range 0.3 – 16.0 deg C

  • Alarm function range: 0.5 – 5 deg C of set point temperature

  • Resolution: 0.1 deg C

  • Accuracy: ±1 deg C (30 - 50 deg C)                   

  • Power supply: 220VAC±10%, 50/60Hz          

  • Operating Humidity range: 20%  - 85%

  • Power consumption: ≤3W

  • Product Code TC125 

Copyright © 2017-2020 by Oene van der Meer

All rights reserved.

  • Facebook Social Icon

Oene van der Meer

Hamweg 88

9617AT Harkstede

Netherlands

Tel.: +31 (0)6 11 34 31 79

E-mail: sales@oenevandermeer.com