D&D Jumpguard

There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.

D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.

Available sizes

Available in the following versions and are designed to be cut to size:

  • TC7575PRO - 75cm x 75cm nominal size.

  • TC12075PRO - 120cm x 75cm nominal size.

  • TC18090PRO - 180cm x 90cm nominal size.

Notes:

  1. The maximum size frame that can be made from each kit will be 3.6cm longer than stated in each direction.

  2. The tank should be measured from inside face of glass to inside face of glass.

Assembling the Jumpguard
Whats in the box?

The Jumpguard Pro Aquarium Cover is a kit of parts which allows the aquarist to create a custom frame for their specific aquarium. The rigid corners and extruded aluminium section create a very solid frame which sits neatly inside glass of the aquarium glass, resting on the top lip.  


Kit Contents:

TC7575

  • 90cm x 90cm 1PC bird mesh, black material

  • 5 x 75cm lengths of section in black extrusion profile

  • 1 x red spline roller tool

  • 6 x black standard corners

  • Black spline,total length 3.5m

  • 2 x Black finger pull

  • 2 x Reverse corner

  • 1 x 75cm brace bar

  • 4 x brace clips

 

TC12075

  • 140cm x 90cm 1PC bird mesh, black material

  • 3 x 75cm + 2 x 120cm lengths of section in black extrusion profile

  • 1 x red spline roller tool

  • 6 x black standard corners

  • Black spline, total length 4.4m

  • 2 x Black finger pull

  • 2 x Reverse corner

  • 2 x 75cm brace bar

  • 6 x brace clips

  • 2 x T corners

 

TC18090

  • 200cm x 110cm 1PC bird mesh, black material

  • 7 x 90cm lengths of section in black extrusion profile

  • 1 x red spline roller tool

  • 6 x black standard corners

  • Black spline, total length 5.9m

  • 2 x Black finger pull

  • 8 x brace clips

  • 3 x 90cm brace bar

  • 2 x Reverse corner

  • 2 x T corner

Copyright © 2017-2020 by Oene van der Meer

All rights reserved.

  • Facebook Social Icon

Oene van der Meer

Hamweg 88

9617AT Harkstede

Netherlands

Tel.: +31 (0)6 11 34 31 79

E-mail: sales@oenevandermeer.com